Typical Applications
Terrace, veranda and balcony
Wet areas under coating (bathroom, kitchen, etc.)
Indoor and outdoor application areas
Irrigation Channels
Asphalt Membranes
Gypsum and cement panels
Roofs exposed to UV
Cleverproof™ 640 TC-1K
CLEVERCOAT™ PU 640 TC 1K is a transparent, one component, PU based, aliphatic top coat with high UV resistance. It cures with the humidity in the air and creates a transparent and glossy film layer. It aliphatic structure preserves its color when exposed to sunlight, does not fade or turn yellow.
Features & Benefits
Easy to apply (by brush, roller or spray)
It has excellent UV resistance
It provides excellent adhesion to the surface
Its aliphatic structure, preserves its color when exposed to sunlight, does not fade or turn yellow
When applied, it provides a one-piece film layer that does not cause joint or leakage
It is resistant to continuous water contact
Preserves its mechanical properties between -40°C and +80°C
✓
It has excellent chemical resistance
Method Statement
Surface Preparation:
The surface to be treated shall be cleaned from adherence and adhesion weakening factors such as oil, grease, paraffin waste, cement grout, loose particles, mold release agents, cured old membranes. If necessary the surface shall be washed with high pressure water jet, and be thoroughly dried. Surface defects such as cracks, unevenness etc should be repaired with suitable products..
Priming :
The prepared surface should be primed with CLEVERPRIME™ PU PRIMER 200
Product Application :
Before using, the package should be opened and mixed with a low speed mixer for 2-3 minutes. The products should be applied @ 0.15 – 0.20 kg/m2 with a roller or brush until the entire surface is covered, at least in two layers. If air is entrapped into the material, visible air bubbles will occur after the material is cured on the
floor. The material is poured over the primed surface and spread over the entire surface with the help of a roller or brush.
Specification
Apply polyurethane based liquid waterproofing membrane CLEVERCOAT™ PU 640 TC 1K @ 0.15 – 0.20 kg/m2 on primed surface after necessary surface preparation.
For more details and technical proposals click here to contact
CLEVER CUSTOMER SUPPORT.
Clever Polymers & Construction Chemicals Private Limited
India Office
A32 Thamarai, Shantiniketan
City Link Road, Adambakkam
Chennai 600088.
HQ & R&D
İstanbul Mermerciler Küçük San. Sit.
Köseler Mah. 34. Cad. No:5
Gebze / Kocaeli̇
© 2021 Clever Polymers. All Rights Reserved.