Cleverproof™ 400 BT-1K Aqua

Typical Applications

Wet areas,

Asphalt membranes,

Undertile applications,

Basements and retaining walls,

Gypsum and cement boards,

Roof, terraces and balconies.

Features & Benefits

Thixotropic & Water based

Simple application (by brush or roller),

When applied forms seamless membrane without joints,

It is based on elastomeric hydrophobic polyurethane resin,

It provides permanent elasticity up the -40 ˚C,

Provides water vapor permeability, so the surface can breathe,

If 400 BT 1K AQUA gets damaged, it can be easily repaired locally
within minutes,

Resistant to chemicals,

Useful for vertical applications and never sagging.

Method Statement

Surface Preparation:

The surface to be treated shall be cleaned from adherence and adhesion weakening factors such as oil, grease, paraffin waste, cement grout, loose particles, mold release agents, cured old membranes. If necessary the surface shall be washed with high pressure water jet, and be thoroughly dried. Surface defects such as cracks, unevenness etc should be repaired with suitable products.

Priming :

The prepared surface should be primed with CLEVERPRIME™EPOXY PRIMER WB

Product Application :

Before using, the package should be opened and mixed with a low speed mixer for 2-3 minutes. The products should be applied @ 2.0 to 3.0 kg/m2 with a roller or brush until the entire surface is covered, at least in two layers. After the first coat is applied, the second coat should be applied in minimum 4 and maximum 24 hours. If the application of the second layer has not been made within the specified time, before application please consult to the CLEVER CUSTOMER SUPPORT for information and solutions.

Specification

Apply polyurethane based liquid waterproofing membrane CLEVERPROOF™400 BT 1K AQUA @ 3.0 kg/m2 in two coats on primed surface after necessary surface preparation.