CLEVERPROOF™ 400 BT 2K is a two-component, bitumen-polyurethane-based, coldapplied liquid waterproofing membrane that contains bitumen. It forms a root-resistant film layer with 2000% elasticity by perfectly adhering to almost every surface it is applied to.
Green roofs and botanical garden terraces
Water tanks (except drinking water tanks)
Foundations
Irrigation channels
Bridge platforms
Cut and Cover tunnels
Bathroom, veranda, terrace and roofs (under tiles)
Gypsum and cement panels
Asphalt membranes
Light roofs made of metal and fiber cement
Easy to apply
When applied, it provides a one-piece film layer that does not cause joint or leakage
Plant root resistance test certificate
It is resistant to still water and frost
It has water vapor permeability
It preserves its mechanical properties between -40°C and +80°C
It is resistant to cold. It keeps its elasticity up to -40°C
Provides effective resistance against chemicals
It can also be used as joint material
It has an elastomeric hydrophobic structure
It has excellent mechanical properties. It has elongation, tensile, tear and abrasion resistance
Surface Preparation:
The surface to be treated shall be cleaned from adherence and adhesion weakening factors such as oil, grease, paraffin waste, cement grout, loose particles, mold release agents, cured old membranes. If necessary the surface shall be washed with high pressure water jet, and be thoroughly dried. Surface defects such as cracks, unevenness etc should be repaired with suitable products.
Priming :
For absorbent surfaces such as concrete, cement or screed, CLEVERPRIME PU PRIMER 200 or CLEVERPRIME™ EPOXY PRIMER should be used for dry surfaces. In case of moist surfaces CLEVERPRIME™ PU PRIMER 300 2K or EPOXY PRIMER WB should be preferred. CLEVERPRIME™ EPOXY WB GLOSSY should be used on non-absorbent surfaces such as metal, ceramic or old coatings..
Product Application :
Before using, the package should be opened and mixed with a low speed mixer for 2-3 minutes. For spray application. The products should be applied @ 1.50 to 2.0 kg/m2 with a roller or brush until the entire surface is covered, at least in two layers. After the first coat is applied, the second coat should be applied in minimum 4 and maximum 24 hours. If the application of the second layer has not been made within the specified time, before application please consult to the CLEVER CUSTOMER SUPPORT for information and solutions.
Apply bitumen modified polyurethane based liquid waterproofing membrane CLEVERPROOF™ 400 BT 2K @ 1.50 to 2.0 kg/m2 in two coats on primed surface after necessary surface preparation.
For more details and technical proposals click here to contact
CLEVER CUSTOMER SUPPORT.
A32 Thamarai, Shantiniketan
City Link Road, Adambakkam
Chennai 600088.
İstanbul Mermerciler Küçük San. Sit.
Köseler Mah. 34. Cad. No:5
Gebze / Kocaeli̇
© 2021 Clever Polymers. All Rights Reserved.
